Hot Tub Spa Circuit Installations

You got a new hot tub! Now it is time to get it wired.

Most people do not realize that wiring a hot tub is an important and often big part of purchasing a hot tub. However, the amount of power needed for the heaters, combined with the fact that the users are sitting in water, makes the electrical component of a hot tub very important. There is even a special section in the National Electrical Code for hot tubs.

All hot tubs, regardless of size, need GFCI protection and proper grounding. These are the most important steps to insuring that hot tub users are safe. There must be a disconnect in case of emergencies and the wiring should be protected from moisture and chemical
damage.

Is your hot tub wired correctly? Our certified technicians are experienced and trained in running dedicated 50Amp/240Volt circuits to patios, decks, pools, etc. We will verify that your hot tub is properly grounded and protected with a UL listed GFCI device. Plus, we warranty our work for life. That way you don’t have to worry when you’re trying to relax.

Concerned about your existing hot tub? We can check the existing circuit for safety and proper grounding. Although the cost of a hot tub inspection is minimal, the peace of mind that comes from knowing your friends and family are safe in the water is priceless. Let TE Certified Electricians bring your existing hot tub wiring up to code and makes it safe for  everyone who uses it.

Is your Hot Tub a 60A or 50A disconnect? Many hot tubs these days come with option wiring diagrams to allow for heaters and jets to run simultaneously. Do you know how yours is wired? TE Certified Electricians can make sure you get the right hot tub disconnect installed and make the most out of your hot tub experience.

Schedule service

How We’re Qualified

There are a lot of electric companies in Atlanta wanting your attention, especially when you have the least amount of time imaginable! So our promise is simple: If you see an electrician in our uniform, he’ll be both state-licensed and TE-Certified. TE Certified techs are specialists. They are also W-2 employees of our company which means they answer to us for every minute they’re in the field, at your home, and working on your equipment. And believe it or not, we probably require better work performance than even our customers!

Our technicians complete many hours of extensive in-house training, and pass written exams, code testing, and hands-on skill assessments. But their training doesn’t stop there. Mandatory weekly training sessions keep them up-to-date on the latest in electrician trends; the newest innovations; and the city, state and federal electrical guidelines.

While there may be several ways to handle your electrical needs are “OK,” we follow an extensive set of “best practices” that we are constantly sharpening so you know you’re getting the best quality workmanship in Atlanta.

 

We Drive Fully-Stocked Service Vans

te-repair-van-380x188We send out our electricians “Ready to Work.” Even if your appointment is just an estimate, if you’re confident with our company (and we’re sure you will be!), you can decide to go ahead and complete the work right then. Since electrical is our business, our service vans carry the latest in technology and diagnostic devices, the best time-tested tools and equipment of our trade, and the electrical repair parts we use all of the time. We restock daily to make sure the one showing up in front of your house is fully-equipped to meet your project head-on. Even if you decide on a major installation, our technicians have everything they need to get the work started. Regardless of your project, we show up ready to get the job done.

TE CERTIFIED ― Scheduling an Appointment is Fast and EasySchedule Now